View source for Debian Linux cryptocoin mining rig setup guide

This guide will give you detailed information on installing [[Debian]] [[Linux]], the [[AMD]] video drivers (GPU), the AMD APP SDK, and [[cgminer]] (with temperature readings and changing graphics card clock speeds, voltages, etc).

 Donations to the original author: LTC LYNFisPEmoEJRuVNKWWaUaxskTZUxMCz1G or BTC 1K3D82nFruLa5pJwEMYS1XXvC1suQhNGdb

''Note: This guide sets you up to run cgminer as root; if you need a different configuration, be sure to modify your install process. The warning to use strong passwords exists for a reason!''

== Preparation ==
Download either [http://unetbootin.sourceforge.net/ UNetbootin] or [http://rufus.akeo.ie/ Rufus] to copy your Debian image to a USB memory stick. Rufus is supposedly twice as fast as the other available options.

If using Rufus, you must first [http://www.debian.org/distrib/netinst download a copy of Debian], the 32-bit (i386, x86) version should be fine regardless of your system configuration.
: Within Rufus, click on the disc image located beside <code>Copy a bootable disk using:</code> and select the Debian Linux ISO that you've downloaded. Make sure the associated checkbox is checked and that the dropdown says <code>ISO Image</code>. Make sure you select the correct USB stick and click <code>Start</code>.

If using UNetbootin: <code>(*) Distribution -> Debian -> Stable_NetInstall</code>

== Install Debian Linux ==
: ''Note: There have been issues getting mining started on UEFI motherboards. The Debian install is successful but installing drivers or getting cgminer to run is impossible.''
: If you have a UEFI motherboard, you need to enter the BIOS (with the key plugged in already) and find a section along the lines of ''Boot Override'', or if that section doesn't exist, the section to change ''boot order''. You need to select ''USB boot'' or ''legacy boot'', but definitely not anything called ''UEFI boot''. Select the non-UEFI option for your USB key and install Linux as described below.

Start the computer with the key plugged in. When the installer begins, select <code>Install</code>. Select your language. Select your country. The default keymap is usually what you want.

You can just select <code>Continue</code> for the hostname screen. The default is fine. The domain name can be blank, select <code>Continue</code>.

Choose a secure password for your root account. The root account controls the entire system and can be logged in to by any computer on the network. If a person gains access to your router, they can also access that PC. A secure password will prevent anyone else from gaining access to the computer.

Either type in a name for your user account, or leave it blank. Select a new username for your account, it can be anything that you want to log in to. Select a secure password for that new account.
: ''The new user creation can generally be 'skipped'. If you don't set up the PHP monitoring script, you won't need the new user and we'll be deleting it anyway.''

Select your time zone.

During the disk setup, there are two methods. The simplest method is to select the following:
:: ''This method creates a swap partition which may degrade the performance or lifespan of a USB stick. A mechanical hard disk would benefit from the swap file.''
: <code>Partitioning method: Guided - use entire disk</code>
: Select the correct USB key or disk drive that you are installing the system to.
: <code>Partition scheme: All files in one partition</code>
: <code>Finish partitioning...</code>
: Select <code>Yes</code> to write the changes.

A more advanced method would be to remove the swap partition and save writes to your USB key:
: Instead of using the <code>Guided</code> method, select <code>Manual</code>.
: Select the correct USB key or disk drive that you are installing the system to.
: Select the <code>pri/log</code> line.
* ''Depending on your system, it may be necessary to add another partition to make your system bootable, an <code>EFIboot</code> partition, which doesn't need to be more than 512MB. If you have to use this method, the partition below should not be selected as "bootable"''
: <code>Create a new partition</code>
: <code>Continue</code>
: <code>Primary</code>
: Select <code>Mount options</code>, select <code>noatime</code> using the Spacebar.
: Select <code>Bootable flag</code> to set it to <code>on</code>.
: <code>Done setting up the partition</code>
: <code>Finish partitioning...</code>
: Select <code>No</code> when it warns you about the swap partition. You don't want a swap partition.
: Select <code>Yes</code> to write the changes.

Select your country to get a list of download mirrors local to you. Select a mirror which you believe to be closest. Leave the page asking about a proxy blank, just select <code>Continue</code>.

<code>Configuring popularity-contest</code>: select <code>No</code>.

<code>Software selection</code>: Deselect all default options (Spacebar) and enable <code>[*] SSH server</code>.

<code>Install the GRUB boot loader...</code>: <code>Yes</code>.

<code>Continue</code>

Linux is finally installed!

== Post-install system setup ==
Now that Debian Linux is installed, you no longer have to sit in front of the rig's monitor. You can log in to your system remotely with any SSH, SCP or SFTP program. If you are using Windows, I suggest [http://winscp.net WinSCP] and [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY].

Log in as username <code>root</code>, using your root password.
: ''PuTTY would be the program we need for the rest of this guide, though you can run WinSCP first, add the connection info, then when logged in with WinSCP, hit <code>ctrl+p</code> to open PuTTY.''

<nowiki>#</nowiki> <code>nano /etc/apt/sources.list</code>
: For each line that starts with <code>deb</code>, add the following to the end: <code>contrib non-free</code>
: To exit the editor (nano), hit <code>ctrl+x</code>, then <code>Y</code>, and finally, just hit Enter.

<nowiki>#</nowiki> <code>apt-get update && apt-get upgrade</code>

<nowiki>#</nowiki> <code>apt-get install bzip2 fglrx-driver libcurl4-openssl-dev libncurses5-dev libudev-dev ntp screen unzip xdm xorg</code>

<nowiki>#</nowiki> <code>apt-get purge libfglrx</code>

<nowiki>#</nowiki> <code>apt-get clean</code>

=== Install video card drivers (AMD GPU) ===
: ''The fastest AMD drivers are version 12.8. Unfortunately, you might need to use the latest drivers with Rx series video cards!''
<nowiki>#</nowiki> <code>wget --referer=http://www2.ati.com http://www2.ati.com/drivers/linux/amd-driver-installer-12-8-x86.x86_64.zip</code>

<nowiki>#</nowiki> <code>unzip amd-driver-installer-12-8-x86.x86_64.zip && sh amd-driver-installer-8.982-x86.x86_64.run --force</code>
: When the installer starts, just press Enter on any screens until the driver finishes installing.

Initial graphics card setup (also do this after adding or removing cards):

<nowiki>#</nowiki> <code>rm /etc/X11/xorg.conf && aticonfig --adapter=all --initial</code>

=== Install AMD APP SDK ===
: ''Rx series video cards might require the latest SDK!''
<nowiki>#</nowiki> <code>mkdir app-sdk && cd app-sdk && wget http://developer.amd.com/wordpress/media/2012/11/AMD-APP-SDK-v2.8-lnx32.tgz && tar xzf AMD-APP-SDK-v2.8-lnx32.tgz && sh Install-AMD-APP.sh && cd ..</code>
* ''If you use Debian x64, modify the URL and filename to lnx64 instead of lnx32.''

Type <code>Yes</code> when prompted.

<nowiki>#</nowiki> <code>nano /etc/profile</code>
: Add the following to the bottom of the file:
 <code>export DISPLAY=:0
 export GPU_MAX_ALLOC_PERCENT=100
 export GPU_USE_SYNC_OBJECTS=1
 export XAUTHORITY=/.Xauthority</code>

REBOOT!!!

<nowiki>#</nowiki> <code>reboot</code>

=== Install cgminer ===
[[cgminer]] 3.1.1 is what we use, though the newer Rx series video cards may require version 3.7.2. All versions tend to have the same mining performance, later versions generally just include support for newer [[Bitcoin]] mining hardware. You can use any version you want by changing the download URL and updating the filenames in the commands below.

<nowiki>#</nowiki> <code>wget http://ck.kolivas.org/apps/cgminer/3.1/cgminer-3.1.1.tar.bz2</code>

<nowiki>#</nowiki> <code>tar jxf cgminer-3.1.1.tar.bz2</code>

<nowiki>#</nowiki> <code>cd cgminer-3.1.1/ADL_SDK && wget http://mein.intern3ts.com/ADL_SDK_5.0.zip && unzip -j ADL_SDK_5.0.zip 'include/adl_*.h'</code>

<nowiki>#</nowiki> <code>cd .. && ./configure --enable-scrypt && make && make install</code>

<nowiki>#</nowiki> <code>cd .. && rm -rf cgminer-3.1.1 cgminer-3.1.1.tar.bz2</code>

Put your <code>[[cgminer.conf]]</code> file in <code>/root/.cgminer</code> and add your configuration information (pools, thread-concurrency, etc).

== Running cgminer and mining ==
'''Your setup is now complete.'''

You can type <code>cgminer</code> in any location to begin mining. The <code>.bin</code> file for your GPUs will be generated, on first run, in the directory where you've run cgminer.

=== Using Screen ===
You can use a program--which we installed near the beginning of the setup--called '''Screen''' to run cgminer without having to keep an SSH session open at all times. Using Screen, you can also have the system autostart cgminer while giving you the ability to check on it after it's started.

Before starting cgminer, use the following command to open a screen window that you can attach to again later: <code>screen -R cgminer</code>. After that, you can type <code>cgminer</code> as you usually would.

Now that you've got cgminer running properly, you might want to close your SSH window, or maybe just go back to the command line and do other things. You can exit that Screen session (detach) by hitting the keys <code>ctrl+a d</code>.

You can get back in to your Screen session (reattach) by simply typing <code>screen -r</code>.

You can also use Screen for any other long running task which you may not want to have a window open for the duration of its run time.

=== cgminer on boot ===
If you want cgminer to start every time you reboot, add the following to the bottom of <code>/etc/rc.local</code>:

<code>screen -dmS cgminer bash -lc 'sleep 10; export HOME=/root; cgminer;'</code>

Using this method, you won't have to log in to your rig to start cgminer every time you reboot. Also, you can log in to your rig and use the screen commands to monitor cgminer at any time after it boots.

== PHP stats script ==
cgminer is shipped with a PHP script that will show you your cgminer information using the cgminer API. You can access this script from a web browser after configuring the script, cgminer and an httpd.

If you do not plan to use this script, you can delete the user account that was created during the Debian install process.

<nowiki>#</nowiki> <code>deluser <username> && rm -rf /home/<username></code> ''(Replace <code><username></code> with the username you created.)''

The setup procedure will be added at a later time, though the documentation is available through web searches.

 Donations to the original author: LTC LYNFisPEmoEJRuVNKWWaUaxskTZUxMCz1G or BTC 1K3D82nFruLa5pJwEMYS1XXvC1suQhNGdb

== External links ==
* [http://www.debian.org/distrib/netinst Debian Netinstall download]
* [http://rufus.akeo.ie/ Rufus]
* [http://unetbootin.sourceforge.net/ UNetbootin]
* [http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html PuTTY]
* [http://winscp.net/ WinSCP]
* [http://ck.kolivas.org/apps/cgminer cgminer downloads, all versions]

[[Category:Cryptocurrency]][[Category:Technology]]