Asus A8N32-SLI Deluxe and Corsair XMS 3500LL-Pro setup guide
From lurkmore wiki
Jump to navigationJump to search
These settings work extremely well, X2 4400+ overclocked at 2750MHz and memory at 250MHz CL2.5-3-2-6 1T. Settings tested and tweaked by King_John.
| AI Overclocking | Manual |
| CPU FSB Frequency | 250 |
| SB to NB OverClock | Manual |
| SB to NB Frequency | 200 |
| Adjust PCIE Frequency | 100 |
| PEG link mode | Disabled |
| Over-Voltage CPU Vcore | Enabled |
| Over-Voltage NB Vcore | Disabled |
| Over-Voltage SB Vcore | Disabled |
| Over-Voltage Hypertransport | Disabled |
| DDR VCORE | 2.65V-2.7V (don't go over 2.9V) |
| FID/VID Change | Manual |
| Processor Frequency Multiplier | 11x |
| Processor Voltage | 1.3 (CPU over-voltage adds 0.2V) |
| AI Clock Skew | Auto/Auto |
| GART Error Reporting | Disabled |
| MTRR Mapping | Continuous |
| 1T/2T memory timing | 1T |
| Memory Setting: Memory Configuration | |
|---|---|
| Memclock Mode | Limit |
| Memclock Value | 200 (1:1) |
| MCT Timing Mode | Manual |
| CAS Latency (CL) | 2.5 |
| TRAS | 6 CLK |
| TRP | 2 CLK |
| TRCD | 3 CLK |
| TRRD | 2T |
| TRC | 8T |
| TRFC | 24T |
| TRWT | 2 CLK |
| MCT Extra Timing Mode | Manual |
| TREF | 7.8 us |
| TWCL | 1 |
| R/W Queue Bypass Count | 8 |
| ByPass Max | 4 |
| Idle Cycle Limit | 64 |
| Dynamic Idle Cycle Counter | Disabled |
| DDR Driving Strength | Normal |
| Enable 32-Byte Granularity | Disabled |
| TWR | 2 CLK |
| DDR Input Strobe skew | Disabled |
| DDR Data Driving Strength | Disabled |
| User Config Mode | Manual |
| Read Preamble | 9.5ns |
| Asyc Latency | 11.0ns |
| Bank Interleaving | Auto |
| Burst Length | 4 Beats |
| Hardware Memory Hole | Disabled |
| Memory Setting: ECC Configuration | |
| L2 Cache BG Scrub | Disabled |
| Data Cache BG Scrub | Disabled |
| K8 to NB Frequency | 4X |
| K8 to NB LinkWidth | 16/16 |
| SB to NB Frequency | 5X |
| SB to NB LinkWidth | 16/16 |
| Primary Graphics Adapter | PciE1->PCI->PciE2 |
! Important !
AMD Cool 'N Quiet off! Disable Legacy USB otherwise your computer will be a pile of poop! Do not go over 1.55V on your Processor Voltage!
